Skip to end of banner
Go to start of banner

Integrating POS Systems - Setup and Integration

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Configuration

Authentication

Before performing any logical unit of work, an authentication token must be acquired and subsequently will be used by all other Web API methods in order to access and performed any operations in the system. All API requests must be made using a valid authentication token, otherwise such requests will fail

Acquiring an authentication token can be accomplished by using one of the following methods

  • Web API Key
  • Username & Password

Recommended Authentication Method

The recommended method of authentication is using Web API Keys of a "System Key" classification. Web API Keys are assigned to specific users in order to access a specific organization and can be used to authenticate users through Web API, resulting to an authentication token that can subsequently be used by other Web API calls, without any data restrictions

The authentication Web API call that should be performed is POST authentication/web_api_key/token (based on HTTP Basic Auth)

Web API Key Method Example

Reference

Visit API Authentication for more information

Using Fields Set

CRM.COM Web APIs offer the ability to select the fields that will be retrieved from each API method by specifying the "fields_set" input parameter

Using this parameter developers have the ability to filter the response object and retrieve only the fields that will be used for the desired implementation. If "fields_set" is not specified, then all fields of the response will be retrieved

The "fields_set" attribute is used for each call throughout the entire integration guide

Reference

Visit Introduction - Using Fields Sets for more information

Using Pagination

There are some API methods that retrieve a large number of entities, such as list API methods. Some of these CRM.COM API methods provide the option to apply pagination on the results retrieved

In such cases the API call should be constructed using the following input parameters

  • number_of_results: The number of results that can be retrieved through each call. The maximum number of results can be 50, and objects are returned in chronological order (oldest requests are retrieved fist)
  • offset: Defines the number of entities that should be skipped from the results. During the first call it should be set to 0 and then it should be increased based on the number of results that were retrieved

Reference

Visit Introduction - Using Pagination for more information

Integration Scenarios

Purchase and Spend Award Flow 

The flow described below is an example of a POS integration with CRM.COM Rewards, including both purchase and spend transactions

Step 1 - Customer Identification

NoDescriptionWeb API ExamplePOS Conceptual Examples
1

The customer is identified on the POS system by providing an identification mean. Such identification can be an email address, a phone number, a card number, etc

 

Identifying a customer in CRM.COM (also referred as rewards participant) should be performed using the POST rewards_participants/show method

The following identification means can be used to identify a customer in CRM.COM

  • number: A unique number that is related to each rewards participant
  • access_token_identifier: An access token that is related to a rewards participant. An access token is the most common parameter to use for customer identification purpose, because it can be easily assigned to a rewards participant and usually is mapped to the customer's email address, phone number or card number
POST Request
https://hostname/crmapi/rest/v2/rewards_participants/show
Body 
{
	"token": "{{token}}",
	"rewards_participant_identifier":{
		"access_token_identifier":{
			"authentication_code": "22265577"
		}
	},
	"fields_set": "accounts_receivable,wallet"
}

Prior Customer Identification

2

Once a customer is identified in CRM.COM, then the full information of the customer is returned

 

The following information can be displayed on the POS screen

Response 
{
	"data":{
		"wallet": {
			"number": "W0000000001,
			"balance": "10.00",
			...
		},      
		"accounts_receivable":{
			"life_cycle_state": "ACTIVE",
			"number": "400",
			"name": "John Doe",
			"id": "123456789"
			"account_owner":{
				"name": "John Doe",
				"first_name": "John"
				"last_name": "Doe",
				"life_cycle_state": "FINANCIAL",                
				"title": "Mr",
				"type": "PERSON",
				...
			},
			...
		}
	},
	"status":{
		"message": null,
		"description": null,
		"code": "OK"
	}
}

After Customer Identification

Step 2 - Preview Award and Spend Information (Optional)

NoDescriptionWeb API Example

POS Conceptual Examples

1

Prior completing the sales transaction on POS, customer may request to know their available balance and the amount that are eligible to spend on the related transaction. In addition, the preview method will determine whether the purchase customer event that will be submitted can be redeemed by the Front-End System (i.e. POS) or by a Back-End System

 

Previewing such information should be performed using the POST customer_events/purchases/preview method, and the following information should be passed to CRM.COM

  • The related customer (accounts_receivable_identifier)
  • The sales transaction's reference number (reference_number)
  • The sales transaction's date (performed_on)
  • The sales transaction's merchant (performed_by_unit_identifier)
  • The sales transaction's items and the amount per each item (products_set)
POST Request
https://hostname/crmapi/rest/v2/customer_events/purchases/preview
Body 
{
	"token": "{{token}}",
	"rewards_participant_identifier":{
		"access_token_identifier":{
			"authentication_code": "22265577"
		}
	},

	"reference_number": "REF0001",
	"performed_by_unit_identifier":{
		"name" : "Unit"
	},
	"performed_on": "2017-06-22T15:00:00",
	"products_set":[
		{
			"product_identifier":{
				"code": "Soft Drinks"
			},
			"quantity": 1,
			"total_amount": 10,
			"net_amount": 8,
			"vat_amount": 2
		},
		{
			"product_identifier":{
				"code":"Sandwiches"
			},
			"quantity": 10,
			"total_amount": 20,
			"net_amount": 26,
			"vat_amount": 4
		}
	],
	"fields_set": "total_additional_spend_amount,
		total_automatic_spend_amount,reduction_method,
		total_instant_spend_amount,
		total_award_amount"
}

Not Applicable

2

Once a customer is identified in CRM.COM, then the full information of the customer is returned

 

The following information can be displayed on the POS screen

Response 
{
	"data":{
		"total_additional_spend_amount": 7.9,
		"total_automatic_spend_amount": 0,
		"total_instant_spend_amount": 0,
		"total_award_amount": 0.08,
		"reduction_method": "FRONT_END_REDUCTION"
	},
	"status":{
		"message": null,
		"description": null,
		"code": "OK"
	}
}

After Preview

 

Step 3 - Submitting Sales Transaction for Awarding Customer

NoDescriptionWeb API ExamplePOS Conceptual Example
1

Once all products are registered in the POS, the sales transaction should be submitted in CRM.COM in the form of a purchase customer event. Creating such customer event, CRM.COM will validate whether the purchased items are eligible to be awarded by a reward offer and credit the customer's wallet balance

 

Submitting a purchase event in CRM.COM should be performed using the POST customer_events/purchases/create method, and capture the following information

  • The related customer (accounts_receivable_identifier)
  • The sales transaction's reference number (reference_number)
  • The sales transaction's date (performed_on)
  • The sales transaction's merchant (performed_by_unit_identifier)
  • The sales transaction's items and the amount per each item (products_set)
  • Whether the customer event should be processed immediately, depending various business processes or not (process_immediately) - in most cases processing is immediately
  • Optionally, the identifier of the POS can be specified (external_system)

 

Products should already exist in CRM.COM in order for the POS to make transactions for them. In the event that a POS integration requires to perform transactions for such items, CRM.COM provides the ability to allow such transaction submission using a default product (everything is handled by CRM.COM without additional changes from the POS system)

POST Request
https://hostname/crmapi/rest/v2/customer_events/purchases/create
Body 
{
	"token": "{{token}}",
	"accounts_receivable_identifier":{
		"number": "001"
	},

	"performed_by_unit_identifier":{
		"name":"Unit"
	},
	"performed_on":"2017-05-22T16:05:00",

	"process_immediately": true,
	"external_system": "POSID01",
	"reference_number":"REF00001",

	"products_set":[
		{
			"product_identifier":{
				"code": "Soft Drinks"
			},
			"quantity": 1,
			"total_amount": 10,
			"net_amount": 8,
			"vat_amount": 2
		},
		{
			"product_identifier":{
				"code": "Sandwiches"
			},
			"quantity": 4,
			"total_amount": 10,
			"net_amount": 8,
			"vat_amount": 2
		}
	],
	"fields_set":"number,total_awarded_amount,reference_number"
}
Not Applicable
2

Once the sales transaction submission is performed (purchase customer event creation), the POS system can proceed to the redemption step

 

The following information can be displayed on the POS screen

  • The amount that was awarded from the purchase (total_award_amount)
  • The amount that was automatically spend from the purchase (total_spend_amount)
  • The available balance of the customer's wallet after the purchase (initial wallet balance + total_award_amount - total_spend_amount)
Response 
{
	"data":{
		"number": "111",
		"total_awarded_amount": 20,
		"reference_number": "REF00001"
	},
	"status":{
		"message": null,
		"description": null,
		"code": "OK"
	}
}

After Customer is Awarded

Step 4 - Redeeming Awarded Amount

NoDescriptionWeb API ExamplePOS Conceptual Example
1

Customer may want to spend some of the available wallet amount on the previously created transaction, submitting a spend customer event in CRM.COM

 

The following information can be displayed on the POS spend request form

  • The amount that can be requested to be spent on that transaction (total_additional_spend_amount)
  • The minimum spend amount allowed to be spend per transaction (minimum_spend_amount_per_transaction)
  • The maximum spend amount allowed to be spend per transaction (maximum_spend_amount_per_transaction)

 

Submitting a spend request in CRM.COM should be performed using the POST customer_events/spend_requests/create method, and capture the following information

  • The related customer (accounts_receivable_identifier)
  • The related purchase customer event that was created above (purchase_customer_request_identifier)
  • The amount that is requested to be spend (spend_amount)
  • The sales transaction's date (performed_on)
  • The sales transaction's merchant (performed_by_unit_identifier)
  • Whether the customer event should be processed immediately, depending various business processes or not (process_immediately) - in most cases processing is immediately
  • Optionally, the identifier of the POS can be specified (external_system)
POST Request
https://hostname/crmapi/rest/v2/customer_events/spend_requests/create
Body 
{
	"token": "{{token}}",
	"accounts_receivable_identifier":{
		"number": "001"
	},

	"performed_by_unit_identifier":{
		"name": "Unit"
	},
	"performed_on": "2017-05-12T11:41:00",

	"external_system": "POSID01",
	"process_immediately": true,

	"spend_amount": 10,
	"purchase_customer_request_identifier":{
		"number": "936"
	},

	"fields_set":"number,
		spend_amount,
		reduction_method,
		spend_reward_transaction"
}

Spend Request Form

2

Once the spend request is performed, it will return back the actual amount that was spent, which might be different than the amount that was requested to be spend

 

The following information will be used in the next step of reducing and closing the sales transactions

  • The actual amount that was spent (spend_reward_transaction.total_amount)
Response 
{
	"data":{
		"number": "294",
		"spend_amount": 10,
		"reduction_method": "FRONT_END_REDUCTION",
		"spend_reward_transaction":{
			"number": "205",
			"total_number": 7.9,
			"net_amount": 7.9,
			"vat_amount": 0,
			"life_cycle_state": "POSTED",
			...
		}
	},
	"status":{
		"message": null,
		"description": null,
		"code": "OK"
	}
}

After Spend Request

Step 5 - Closing the sales transaction

NoDescriptionWeb API ExamplePOS Conceptual Example
1

Once the sales transaction (purchase customer event) and spend transaction (spend request customer event) are submitted successfully , then the POS system can calculate the redemption amount, reduce it from the total amount of the sales transactions, and close the sales transaction with the customer's payment

 

The redemption amount is calculated as the sum of the following attributes

  • The actual amount that was spent (spend_reward_transaction.total_amount), as retrieved from the "spend_request/create" method, and
  • The amount that was spent automatically, which is the total_spend_amount as retrieved by the "purchases/create" method or from the sum of total_instant_spend_amount, total_additional_spend_amount and total_automatic_spend_amount as retrieved from the "purchases/preview" method

 

The total_spend_amount is also the sum of total_instant_spend_amount, total_additional_spend_amount and total_automatic_spend_amount as retrieved by the "purchases/create"  (all these three values are retrieved from the same method as well)

 

The calculated redemption amount is deducted from the POS sales transaction by applying a discount on the sales transaction

 

Upon completion, the following information is displayed and printed on the customer's receipt

  • The amount that was awarded from the purchase (total_award_amount retrieved by the "purchases/preview" or "purchases/create")
  • The wallet balance after the purchase. The new balance is calculated as the wallet's initial balance + awarded amount - redemption amount

Not Applicable

Receipt

Product Synchronization Flow

The flow described below is an example of synchronizing products from a POS system into CRM.COM

 Product Synchronization can be achieved using existing CRM.COM Web API methods, where product information (as described previously) can be passed through a product parameter set

The maximum number of products that can be synchronized per call is 1,000

Step 1 - Synchronize Products

NoDescriptionWeb API ExamplePOS Conceptual Examples
1

Product synchronization on a POS system can implemented as a batch process that is performed on a repeated basis (i.e. every day at 2 am), where product information is sent to CRM.COM

 

Submitting a product synchronization request in CRM.COM should be performed using the POST products/synchronise method, and capture the following information

  • The product synchronization definition that describes how the products information from the POS system will be handled by CRM.COM (synchronisation_definition_identifier)
  • The POS products and their related attributes (code, description, family, brand, categories, etc) per each product (products_set)

 

The maximum number of products that can be synchronized per call is 1,000

 

 

POST Request
https://hostname/crmapi/rest/v2/products/synchronise
Body 
{
	"token": "{{token}}",
	"synchronisation_definition_identifier":{
		"alternative_code": "Product_Sync"
	},

	"products_set":[
		{
			"code" : "Orange Cookie",
			"alternative_code" : "10021",
			"description":"Cookie with orange cream",
		},
		{
			"code" : "Iced Caramel Latte",
			"alternative_code" : "20071",
			"description":"Latte with caramel syrup",
			"family_identifier" :{
				"code" : "Iced Coffee"
			}
		}
	],

	"fields_set":"unprocessed_products_set,processed_products_set"
}
Not Applicable
2

Once the product synchronization request is submitted and upon completion processing from the CRM.COM, the following information is returned (and handled accordingly by the POS system)

  • The products that were not processed by CRM.COM due to an error was thrown (unprocessed_products_set)
  • The products that were processed successfully by CRM.COM (unprocessed_products_set)
Response 
{
	"data": {
		"unprocessed_products_set": [
			{
				"error_description": "Error:Product Family (Iced Coffee) Not Found. - Description:The specified API value was not found.",
				"error_code": "NotFoundAPIValueException",
				"request_code": "Iced Caramel Latte"
			}
		],
		"processed_products_set": [
			{
				"code": "Orange Cookie",
				"request_code": "Orange Cookie",
				"id": "E15E0F60F5D147B28C8FD50ADE4E0116"
			}
		]
	},
	"status":{
		"message": null,
		"description": null,
		"code": "OK"
	}
}
Not Applicable

 

 

  • No labels